WE OFFER
Effective solutions to improve road quality
VELETON ™ additives provide high performance and manufacturability, solve the problems of fracture and cracking, are ideal for hot and cold climates, creating more durable and efficient roads.
OWN PRODUCTION
We produce using advanced technologies
The production is equipped with high-tech European equipment (Germany, Austria), we produce more than 7,000 tons of polymer additives annually.
EXPERT HELP
We provide full technological support
Our highly qualified technologists, together with the staff of the National Transport University, provide full technological support for all regular customers:
- audit of equipment, production capabilities and processes;
- analysis of the input components of the asphalt concrete mixture and selection, taking into account the customer’s requirements and cost;
- laboratory testing of finished products (mixtures);
- full support of the production process with visits to production and facilities at your own expense.
WE WORK WITH CONFIDENCE
More than 10 years of use
The largest industrial enterprises in Ukraine use our polymers as the main or auxiliary component.
The company has developed and successfully introduced more than 30 types of polymer additives into the production process of customers.
OUR PROJECTS
OUR PROJECTS
SBS polymer
- high elasticity (up to 1000%) and the ability of asphalt-concrete mix to relax;
- wider plasticity range;
- stronger adhesion to the mineral components of the asphalt-concrete mix;
- improved low-temperature properties, increased corrosion resistance of road surfaces;
- reducing the rut formation of road surfaces;
- increases the indicators Р0, Р20 (up to 6 MPa) and Р50 (up to 2.4 MPa).
Energy-saving additive
- possesses high adhesion properties, mixes very quickly in bitumen;
- effectively increases the softening temperature according to Softening point;
- contributes to the improvement of ease of laying and compaction, the temperature of laying the asphalt mixture is significantly reduced (by 25-30˚C);
- easily distributed in bitumen and does not delaminate during storage.
Complex supplement V15
- possesses high adhesive properties;
- does not require long-term modification and maturation, it is quickly mixed in bitumen to a homogeneous mixture in 60-100 minutes;
- allows to modify low quality distillation bitumen;
- does not require the use of a colloid mill for complete dissolution in bitumen;
- lower stirring temperature than SBS (160-165˚C);
- low percentage of input into bitumen (from 1%) to obtain indicators according to DSTU 8959: 2019;
- increases the softening temperature by Softening point by 28-30˚C (with an input of 1.5%);
- improves the compaction of asphalt-concrete mix, significantly reduces the possible laying temperature of asphalt-concrete mix.
Complex additive AVE18
It is a special additive based on a mixture of polymers. It is added directly to bitumen and requires thorough mixing at 165-175˚C from two to four hours.
- significantly increases the Softening point index of the original bitumen by 17-20˚C;
- increases the frost resistance of the asphalt mixture; significantly reducing rut formation and improves the high-temperature properties of the asphalt mixture;
- increases the indicators P0, P20 (4.5-6 MPa) and P50 (2.0-2.4 MPa);
- the recommended dosage is 1.6-2% of the bitumen mass.
Polymer additive Alcetan
It is a special additive based on polymers with modifiers. It is added directly to bitumen.
- modifies bitumen in 20-40 minutes, does not require the use of a colloidal mill;
- modification is possible at sufficiently low temperatures of 170-180˚C;
- significantly increases the Softening point index of the original bitumen by 15-17˚C;
- increases frost resistance of asphalt-concrete mixture;
- significantly reduces the rut formation and improves the high-temperature properties of the asphalt-concrete mixture;
- increases the indicators P0, P20 (4.5-6 MPa) and P50 (2.0-2.4 MPa);
- crystallization temperature of the additive (-55˚C);
- the recommended dosage is 3% of the bitumen mass.
Polymer composite modifying additive (PCM)
It is a special additive based on a mixture of polymers. It is an alternative to replacing SBS polymers at a significantly reduced cost. PCM needed to put directly to the mixer of stone materials (in the form of granules).
- increases the speed of production of asphalt-concrete mixture (does not require long-term modification of bitumen);
- increases frost resistance of asphalt-concrete mixture;
- melts quickly and efficiently in a mixture at standard temperatures;
- increases the indicators P0, P20 (up to 6 MPa) and P50 (up to 2.4 MPa), reduces rut formation (rut 1.2-2.0 mm for 10 000 gauge passes).
ABOUT US
VELETON™
The company has been operating on the Ukrainian market since 2007 and specializes in the development and production of polymer additives, closely cooperates with leading scientific institutions in the field of polymer chemistry and road construction (State Enterprise “GosDorNII”, National Transport University, State Enterprise “Dorcenter”). The company is an associate member of the National Association of Road Workers of Ukraine.
The enterprise has three factories equipped with high-tech European equipment (Germany, Austria) and produces more than 7,000 tons of polymer additives annually.
For more than 10 years, the company’s clients have been the largest industrial enterprises in Ukraine, which use polymers as the main or auxiliary component.
The company has developed and successfully introduced more than 30 types of polymer additives into the production process of customers
CONTACTS
Contact us
Contact us for complete information on our supplements and availability. You can fill out an application for a call back, ask a question or call: